Soldering a Segbot Board

<- Previous Step    Next Step ->

Soldering the Power Connector

Now you need to solder the power connector onto the board.


Just like with the USB connector, hold this connector to the board and use your other hand to apply some solder to hold it in place. You do not have to worry about burning yourself with this connector.


Apply a liberal amount of solder to each connection. The result should look something like the following.


<- Previous Step    Next Step ->

Home ♦ Updates ♦ Videos ♦ Contact Information 

Soldering Navigation


Precision. Accuracy. Speed.

University of Illinois at Urbana-Champaign Logo Control Systems Instructional Laboratory
University of Illinois
at Urbana-Champaign
1406 W Green
Urbana, IL 61801-2307