University of Illinois at Urbana-Champaign

Contact Us | Map & Directions

Soldering a Segbot Board

<- Previous Step    Next Step ->

Soldering the Switches

Again using one hand to hold the switches in place and the other to apply some initial solder, solder both of the switches to the back of the board. The result should look like the following.

<- Previous Step    Next Step ->

Home ♦ Updates ♦ Videos ♦ Contact Information 

---

Soldering Navigation

Select a Soldering Step Soldering Home Soldering on a FT2232D Soldering the Resonator Soldering TL1963A Regulators Soldering the Other Chips Soldering the Other Surface Mount Devices Soldering the USB Connector Soldering the Power Connector Soldering the Switches Soldering the LEDs Soldering the DIMM Connector Soldering the Headers

---

Control Systems Instructional Laboratory
University of Illinois
at Urbana-Champaign
1406 W Green
Urbana, IL 61801-2307